YGE SAPHIR 125 LVT BEC Brushless Regler m. Telemetrie 4-8S

Brushless controller YGE SAPHIR 125 LVT BEC with telemetryyge-logo.png

• Now also with RCT cooling concept
• Same technical features as the big brother, Saphir 155
• 4-8s Lipo capable
• Adjustable high-performance BEC with a load capacity of 12A continuous and 25A peak
• BEC current is now measured separately and output via telemetry
• Electrolytic capacitor temperature is now monitored and output via telemetry
• Current limit can be set up to 200A, making it ideal for high peaks in helicopters
• Slim, flat and lightweight design, therefore also fits perfectly in narrow glider hulls
• Electrolytic capacitors are now largely enclosed by the housing and therefore more robust
• Honest specifications: Genuine 125A duration!
• 4.5mm narrower and 6mm flatter than the 135LVT!
• Dimensions with electrolytic capacitors (LxWxH): 76.5x34.5x19.5mm
• Weight with cables: 124g

Technical data

• 4 to 8s LiPo, back regulation or switch-off in case of undervoltageyge-saphir-series.jpg
• BEC 5.0V - 8.4V
• BEC 12A continuous, 25A peak
• "T" stands for telemetry. The following telemetry protocols are currently compatible: Mikado VBC, Graupner HoTT V4, Jeti
ExBUS,
• Multiplex Sensor BUS V2, own YGE protocol for further telemetry connections via e.g. YGE TexY (Futaba,
Spektrum, FrSky, Core), MSH Brain 2, Spirit FBL
• Update-capable (optional USB adapter available)
• Completely revised hardware and software (32-bit)
• the PWM frequency is automatically adapted to the needs of the motor
• The specified current is the maximum continuous full-gas current with good cooling
• current limitation
• Undervoltage detection can be switched off
• Speed control (governor mode)
• Soft start (sinusoidal or block commutation)
• Super slow soft start possible for scale helis (60 sec.)
• Active freewheeling, therefore unlimited partial load resistance
• Automatic timing, or adjustable in 6 steps
• EMK brake adjustable
• F3A / Acro brake (brake strength continuously adjustable in flight)
• Min. and max. values are logged and can be displayed in the optional PC tool after the flight (e.g. current)
• Speed limit: 240,000 rpm (2-Poler)
• Overtemperature / overload warning
• Anti-flash: Reduces the switch-on spark
• Basic programming via mode setup
• Fine adjustment and selection of telemetry protocol via PC setup, suitable USB adapter is optionally available
• Weight without/with cable: 80/124g
• Dimensions: 76.5 x 34.5 x 19.5mm

Scope of delivery

• 1x YGE Saphir 125V2 brushless speed controller
• 1x fan
• 1x manual