SAVÖX SV-1254MG- Plus

Description

The SV-1254MG+ is a powerful low-profile servo which is very well suited for use in fixed-wing models. Of course, it can also be used in RC cars. The use as swashplate servos for scale helicopters up to the 700 class is another option.

The new + version of the well-known SV-1254MG+ servo differs slightly from its predecessor both visually and technically. A soft start which moves the servo slowly into the start position when switched on and the Sanwa SSR mode characterize the + version.

The technical data of the servo leaves nothing to be desired: 0.085/0.075 sec/60 degrees and 15/18 kg*cm at 7.4/8.4 volts

Control frequency up to 333Hz, center pulse 1520us

Like all HV servos from Savöx, the SV-1254MG+ can of course be operated with up to 8.4V!

Technical data

Actuating time S2/60° (sec): 0.075
Actuating time S1/60° (sec): 0.085
Actuating force S1 (kg*cm): 15
Actuating force S2 (kg*cm): 18
Width (mm): 20.2
Height (mm): 25.4
Voltage range: 4.8V-8.4V
Length (mm): 40.8
Weight (g): 46
Control frequency: Control frequency up to 333Hz, center pulse 1520us
High-voltage capable up to 8.4V: Yes
Gear type: Metal/plastic
Recommended applications: Helicopter, airplane, car, boat
Classification: Low Profile
Ball bearings (number): 2
Motor type: Bell armature motor
Housing type: Part metal
Output teeth (number): 25
Voltage 1 (Volt): 7.4
Voltage 2 (Volt): 8.4

Content

1x servo incl. servo lever and fixing screws