SCORPION A-6528-200KV

Scorpion A-Series motors are designed to be the optimal and first motor choice for your freestyle or UAV aircraft.
We have achieved incredible performance through incredible efficiency.
By optimizing the magnets in the rotor and using the best quality 0.2mm thick silicon steel stator laminations and 2 x single strand 1.2mm enameled copper wire windings rated at over 200 ° C, the power and efficiency results are unlike anything we have seen before! Combined with a rugged design that has been extensively tested for durability and reliability by our world-class team pilots, we believe this motor checks and exceeds all measurable categories!
The A-6528-200kv is specifically designed for 85"-95" 3D machines or other sport/UAV aircraft that require up to 6000W of power.
This engine is equivalent to a 60cc/76cc gasoline engine. We call it 60/76cc because with a 23-inch propeller, it is very similar to a 60cc gasoline engine and draws less amps and therefore could run smaller batteries for a lower overall model weight. Or with a 24-inch propeller, it pulls as hard as a 76 cc gasoline engine, with more amps and therefore a larger battery.

Recommended propellers:

• 23x10E = Efficiency / 60cc power.
• 24x10E = Optimal / 70cc-76cc performance
• 24x12E / 25x8E = High performance

Recommended controllers

• Tribunus II 14-200A ESC SBEC

ACRO Weight Range:

• 8.18kg - 12.7kg (18.0lbs - 28.0lbs)

Sport / UAV (Single Motor) Weight Range:

• 12.7kg - 36kg (28.0lbs -80lbs)

Specifications:

Motor Kv: 200 RPM / Volt
Weight: 998g
Weight (incl. bracket prop. accessories): 1115g
Motor dimensions: 78.5mm x 67.8mm
Motor shaft diameter: 10mm
Continuous current: 95A
Continuous power: 4218 Watts
Peak current: 135A
Peak power: 6000 Watts
Max rec. Lipo: 12s
Stator diameter: 65.0 mm
Stator thickness: 28 mm
Number of stator arms: 12
Magnet poles: 14
Motor winding: 6T/7T Deltascorpion-a-6528-200kv-motor.jpg
Motor cable: 2 strand x 1.2mm
No-load current (IO/15V): 2.02 Amps
Motor internal resistance: 20 mOhm
Motor inductance (phase-phase) @ 1khz: 23 mHrz

Scope of delivery:

• 1 x Scorpion A-6528 motor
• 1 x A-55/65 cross mount (bearing)
• 4 x M4 cross mount mounting screws
• 3 x 6 mm sockets
• 3 x heat shrink tubing
• 3 x Scorpion stickers
• 2 x M10 nuts