SAVÖX SC-1267SG+ Servo

Description
The SC-1267SG+ is a powerful servo of standard size which is very suitable as a steering/throttle servo in a buggy/truggy. Of course, it can also be used in airplanes when an impact-resistant, robust servo is required, e.g. for the tow release or the landing gear. The use as swashplate servos for scale helicopters up to the 700 class is another option.
The new + version of the well-known SC-1267SG+ servo differs slightly from its predecessor both visually and technically. A soft start which moves the servo slowly into the start position when switched on and the Sanwa SSR mode characterize the + version.
The technical data of the servo leaves nothing to be desired: 0.095/0.0.85 sec/60 degrees and 20/25 kg*cm at 7.4/8.4 volts
Control frequency up to 333Hz, center pulse 1520us
Like all HV servos from Savöx, the SC-1267SG+ can of course be operated with up to 8.4V!

Features

• New + version with soft start, Sanwa SSR mode
• Powerful and fast digital servo, robust low-backlash steel gearbox ideal as a steering/throttle servo in a buggy/truggy
• High-voltage capable digital servo 4.8-8.4V, operation with 2s LiPo
• Dimensions (L/W/H): 40.3 x 20.2 x 37.2 mm Weight 62 grams
• 0.095/0.0.85 sec/60 degrees and 20/25 kg*cm at 7.4/8.4 volts

Technical data

Actuating time S2/60° (sec): 0.085
Actuating time S1/60° (sec): 0.095
Width (mm): 20
Actuating force S1 (kg*cm): 20
Actuating force S2 (kg*cm): 25
Height (mm): 37.2
Voltage range: 4.8V-8.4V
Length (mm): 40.3
Weight (g): 62
Control frequency: Control frequency up to 333Hz, center pulse 1520us
High-voltage capable up to 8.4V: Yes
Recommended applications: Helicopter, airplane, car, boat
Ball bearing (number): 2
Motor type: Bell armature motor
Housing type: Part metal
Output teeth (number): 25
Voltage 1 (Volt): 7,4
Gear type: Steel
Voltage 2 (volts): 8,4
Classification: Standard

Scope of delivery

1x servo incl. servo lever and mounting screws