SAVÖX SC-1252MG+ Servo

Description
The SC-1252MG+ is a fast, low-profile servo which is very well suited for use in RC cars. Of course it can also be used in helicopters.
The new + version of the well-known SC-1252MG+ servo differs slightly from its predecessor both visually and technically. A soft start which moves the servo slowly into the start position when switched on and the Sanwa SSR mode characterize the + version.
The technical data of the servo leaves nothing to be desired: 0.08/0.07 sec/60 degrees and 4.5/7 kg*cm at 4.8/6 volts
Control frequency up to 333Hz, center pulse 1520us

features

• New + version with soft start, Sanwa SSR mode
• Dimensions (L/W/H): 40.8 x 20.2 x 25.4 mm Weight: 46 grams
• 0.08/0.07 sec/60 degrees and 4.5/7 kg*cm at 4.8/6 volts
• Fast low-profile servo
• Possible application examples: Low profile for Rc-Car

Technical data

Actuating time S1/60° (sec): 0.07
Width (mm): 20.2
Height (mm): 25.4
Actuating force S1 (kg*cm): 4.5
Voltage range: 4.8V-6V
Length (mm): 40.8
Weight (g): 44.5
Actuating force S2 (kg*cm): 7
Actuating frequency: Actuating frequency up to 333Hz, center pulse 1520us
High-voltage capable up to 8.4V: No
Voltage 1 (Volt): 4,8
Recommended applications: Helicopter, airplane, car, boat
Classification: Low Profile
Ball bearing (number): 2
Voltage 2 (Volt): 6,0
Motor type: Bell armature motor
Gear type: Metal
Housing type: Part metal
Output teeth (number): 25

Scope of delivery

1x servo incl. servo lever and mounting screws