SAVÖX SB-2295SG Servo

With the new SB-2295SG servo from SAVOX, the Taiwanese manufacturer Savöx has achieved a revolution in servo technology. The patented design of this monster provides up to 50 % more power with proven standard installation dimensions.
This monster servo was developed with the best heli pilots in the world, resulting in a true heli monster servo, the values speak for themselves. At 8.4V it delivers a torque of 40 kg*cm with a positioning time of 0.050s / 60°! The control of the servo has been massively improved, making the SB-2295SG perfect for operation with modern gyro systems.
This has been achieved by integrating the brushless motor directly into the all-aluminum housing. In addition to a thermal advantage, this has opened up the possibility of installing a larger motor. A third ball bearing was also integrated into the gearbox in order to be able to transmit the enormous actuating forces in the best possible way over the long term. In direct comparison to our SB-2271SG, the torque has been increased by more than 50% from 20 kg*cm to 32 kg*cm. At the same time, the positioning time has been reduced from 0.065 s/60° to 0.060 s/60° (data at 7.4V). A fully rubberized servo cable is also standard in this servo series. It protects the servo cable from damage, but is still flexible enough to be laid neatly. The SB-2295SG is perfect for use in helicopters, but also for RC cars or fixed-wing models.

Features

• High-voltage brushless digital servo developed with the best pilots in the world
• Operating voltage 4.8V - 8.4V * Direct operation on 2s possible!
• Extremely fast, powerful and precise * 0.05s / 60° and 40 kg*cm torque at 8.4V
• Optimized control for even better response, ideal for the swashplate in high-end helicopters
• Patented design, 3x bearings, perfect heat dissipation due to brushless motor integrated in the housing

Technical data

Actuating time S2/60° (sec): 0.050
Actuating time S1/60° (sec): 0.060
Width (mm): 20.2
Actuating force S1 (kg*cm):32
Height (mm): 38.7
Voltage range:4.8V-8.4V
Actuating force S2 (kg*cm):40
Length (mm):40.3
Weight (g): 79
Control frequency:Up to 333Hz, center pulse 1520us
High-voltage capable up to 8.4V Yes
Recommended applications:Helicopter, airplane, car, boat
Output teeth (number):25
Ball bearing (number):3
Voltage 1 (Volt):7.4
Motor type:Brushless motor
Gear type:Steel
Housing type:Full metal
Voltage 2 (Volt):8.4
Classification:Standard

Scope of delivery

1x servo incl. servo lever and mounting screws