SAB GOBLIN GENESIS SPORT

The SAB Goblin Genesis Sport is a completely redesigned RC helicopter equipped with a number of advanced features It features a belt drive for very quiet and smooth operation and a one-way ball bearing positioned directly on the main rotor shaft to ensure maximum smoothness during autorotation. The 15 mm main rotor shaft is supported by two bearings in a separate unit, making maintenance easier.

The redesigned rotor head features 35 mm blade holder arms with an improved locking system and self-centering titanium washers for greater precision. It also offers the possibility to customize the stiffness of the rotor head.

The tail rotor system is equipped with an 8 mm tail rotor shaft and 8x16x5 bearings, which increase rigidity and smoothness. The one-piece shaft and hub construction ensures maximum precision, while the double-point pitch control slider reduces play in the tail rotor control.

The molded carbon tail boom is directly connected to the main frame and features a belt tensioning system with indicator for optimal control. The batteries are inserted from the rear with integrated connectors so that the canopy does not have to be removed to change the battery. The new S747-O main rotor blades (747 mm) and S110-O tail rotor blades (110 mm) are included. The Genesis Sport offers advanced features that make it an excellent choice for both competition and serious RC helicopter enthusiasts.

Technical specifications

• Weight (without blades, electronics, battery): 2584 g
• Main rotor diameter: 1650 mm (with 747 mm blades)
• Main rotor blade length: 690 to 760 mm
• Tail rotor diameter: 292 mm (with 110 mm blades)
• Tail rotor blade length: 105 to 115 mm
• Cyclic servos: standard size 40 mm
• Tail servo: standard size 40 mm
• Gear ratio main rotor: 11.8 to 8.8 (21T included: 10.1:1)
• Tail rotor gear ratio: 5.1 - 4.9:1 (26T included: 4.9:1)
• Main rotor shaft: 15 mm, tail rotor shaft: 8 mm
• Motor: 12S, 480/560 KV
• Battery compartment: 50x60x300 mm

Scope of delivery

• 1x SAB Goblin Genesis Sport
• Main and tail rotor blades made of carbon fiber
• 2x battery trays with integrated connectors
• S747-O main rotor blades (747 mm)
• S110-O tail rotor blades (110 mm)
• 1x assembly instructions

Still required

• 1x motor: A 12S motor with 480 to 560 KV is recommended.
• 1x ESC: A suitable electronic speed controller for the selected motor
•1x Flybarless system (FBL): For stabilizing and controlling the helicopter.
• 3x servos: Cyclic servos: Standard servos (40 mm) for swashplate control.
• 1x tail servo: A standard servo (40 mm) for tail rotor control.
• 1x receiver: Compatible with your radio control system.
• 1x battery: 12S LiPo batteries with a capacity between 4200 and 5500 mAh.
• 1x charger: Suitable for the LiPo batteries used.
• 1x remote control: At least a 6-channel remote control, but more channels are recommended for extended functions
• Tools and accessories: Special tools for assembly, screw locking varnish, pitch gauge and other accessories for maintenance and adjustment.