Phoenix EDGE Lite 50 Brushless Controller 29,6V 50A

Lose the weight, gain the Edge.

Put your power system on a diet with the Phoenix Edge Lite series of ESCs.
With the same amazing features and functionality of the Edge series, the Edge Lite offers a slight weight reduction for applications that are tight for space or weight.
Simply put, the same brawn with less body - Phoenix Edge Lite.

With the debut of the Phoenix Edge series of ESCs the next evolution in speed controller technology has arrived.
The Edge series introduces a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now.
The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “ unexpected landing” , act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock.
Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.

The Phoenix Edge series is intended for use in helicopters ranging from 450 to 800 size, and fixed wing aircraft up to 1.20 size and larger.
As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter.


Specs
Input voltage: min. 2S LiPo (7,4V), max. 8S LiPo (29,6V)
Continuous at full throttle: max. 50 amps*
BEC voltage: User selectable choice from 5V to 8.4V output
BEC amperage: 5A peak**
Width: 25.4mm
Length: 50.8mm
Height: 23.2mm
Weight (w/wires): 56g
Weight (w/o wires): 28g
Programmability:
- Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software.
- Castle Field Link Programming Card (sold separately) compatible for select functions.


*RC HOBBY APPLICATION RATING: 50 amps with appropriate cooling.
Phoenix Edge Lite controllers are designed without a heat-sink for applications with extreme air-flow, such as EDF planes, or applications with average current requirements much less than peak current requirements.
Controller temperature must never exceed 100°C.
Exceeding current or temperature ratings may damage components and shorten the life of the ESC.
Always verify system current draw at full-throttle.
Decrease load or increase airflow to decrease the ESC’ s operating temperature.

**Peak indicates amperage sustainable for 0.5 seconds – long enough for most servos’ current draw transients.
Your setup may vary. Always confirm servo current draw before the first flight of the model.