Wingstabi EVOLUTION 9ch M-LINK

The next evolutionary step in flight stabilization for fixed-wing models from Multiplex - Made in Germany

For the development of the WINGSTABI Evolution, we have been able to create an enormous database of the most diverse model aircraft over the years. The WINGSTABI Evolution is the logical consequence of this and takes the product to a new level. The controller has been fundamentally optimized in terms of performance, latency and basic settings. All previous WINGSTABI systems can be updated to the Evolution software free of charge and without restrictions. This means that the WINGSTABI Evolution can now be used directly out of the box with almost all flight models without any problems.

A large number of new innovations and functions have also been incorporated into the WINGSTABI Evolution software, which now leaves nothing to be desired.

Examples of this are
• A greatly improved basic setup to get you flying straight away
• Introduction of optional speed-dependent control for optimum performance in any flight condition
• Introduction of a stop function for a natural and smooth action of the flight stabilization
• Possibility of two-receiver operation via SRXL for absolute safety in every flight
• Support for 8-flap wings, canards, optimized FAIL-Safe and much more.

Compatible with all common RC systems:

Jeti (EX-Bus, UDI) - Graupner (SUMD) - Futaba (S.BUS) - FrSky (S.BUS) - Spektrum (SRXL) - HiTEC (MAXIMA SL, OPTIMA SL) - Weatronic (PPM) - MULTIPLEX (SRXL) - CORE (S.BUS, SRXL)

Differentiation between WINGSTABI Evolution EasyControl and WINGSTABI Evolution Classic

EasyControl
• As before, the model is completely programmed on the transmitter (deflections, flaps, expo, flight phases...)
• We need a free channel to which we assign a free proportional transmitter
• Very easy to set up, even without a PC
Classic
• The model is programmed almost completely in the WINGSTABI (deflections, mixers, flaps...)
• We need a free 3-step switch and at least one free proportional encoder
• Extensive setup on the PC or via APP

Every new Wingstabi Evolution is always supplied as "Evolution EasyControl" as standard and can be reconfigured to "Evolution classic" free of charge via the MPX Launcher if required.

The WINGSTABI Evolution has an unbeatable price-performance ratio. Try it out and join us in the 21st century of model flying!

(Speed compensation via pitot tube or GPS Patent: DE 10 2013 201 554 B3 PowerboxSystems)

WINGSTABI EVOLUTION -7/9-DR M-LINK

Freely programmable 3-axis gyro system with integrated MULTIPLEX receiver RX-7/9 DR pro M-LINK for all RC fixed-wing models.
• Integrated M-LINK receiver incl. telemetry
• Optimized high-end control behavior
• Optional speed-dependent control
• Support of receiver diversity
• Plug & play setup possible without a PC
• Programming also possible via PC or Android app
• Up to 4 freely configurable flight/control phases
• 7/9 servo outputs
• Free channel assignment
• Individual settings for each servo (5 point curve, frequency, expo, fail-safe, ...)
• Extensive options for flaps and mixers (delta mixer, V-tail, canards, ...)
• Diversity possible
For our MULTIPLEX users, we offer a solution with an integrated M-LINK receiver. Packaged in a design housing made of anodized aircraft aluminum, this receiver features the latest in RX-DR pro receiver technology