ILGoblin RAW YELLOW

The SAB ILGoblin RAW 700 is an RC helicopter that represents a significant technological advancement in the RC helicopter world Compared to previous models, it has been completely redesigned. The RAW version is a simplified version of the PRO model and features an aluminum tail boom, but retains the main components of the ILGoblin PRO.

The ILGoblin RAW 700 features numerous improvements, including a reinforced 15mm main rotor shaft for increased rigidity, new helical gears for increased durability and strength, and a redesigned one-way bearing system for optimal performance. In addition, a quick-release servo mount allows for easier and faster servo maintenance. This model is designed for advanced pilots.

Technical data

• Frame: 2122 g (without rotor blades, electronics and battery)
• Main rotor diameter: 1576 mm (with 700 mm rotor blades)
• Main rotor blade length: 650 to 730 mm
• Tail rotor diameter: 292 mm (with 110 mm tail rotor blades)
• Tail rotor blade length: 105 to 115 mm
• Cyclic servos: standard size 40 mm
• Tail servo: standard size 40 mm
• Gear ratio main rotor: 11.8 to 8.8 (21T pinion included: 10.1:1)
• Tail rotor gear ratio: 5.1-4.9:1 (26T pinion included: 4.9:1)
• Main rotor shaft: 15 mm
• Tail rotor shaft: 8 mm
• Tail boom: Aluminum
• Recommended motor: 12S, 480/560 KV
• Battery compartment: 50 x 60 x 300 mm

Scope of delivery

• 1x SAB ILGoblin RAW
• 21T motor pinion (other pinion sizes available)
• 1 battery sled with straps
• S701 (700 mm main rotor blades)
• S105 (105 mm tail rotor blades)
• 1x assembly instructions

Still required

• 1x motor: A 12S motor with 480 to 560 KV is recommended.
• 1x ESC: A 12S ESC with a capacity of 160 to 200 A is suitable.
• 3x servos: Cyclic servos: Standard 40 mm servos.
• 1x tail servo: A standard 40 mm servo.
• 1x flybarless system for stabilizing and controlling the helicopter.
• 1x receiver: Suitable for your remote control system.
• 1x 12S LiPo battery with a capacity between 4500 and 5500 mAh.
• 1x Remote control: A transmitter that is compatible with the receiver used.
• 1x charger: A suitable charger for the LiPo batteries used.