AR20410T 20-Channel PowerSafe Receiver with Synapse AS3X+ an

Functions of the Spektrum AR20410T 20-channel PowerSafe telemetry receiver

• Patented redundant PowerSafe™ power supply system with two IC3 connectors. Perfect for aircraft with high servo loads of up to 35A (max 50A burst)
• Innovative power supply with sleep mode that allows pilots to switch the model on and off remotely
• Fast boot recovery technology allows the gyro system to restart in flight in the event of an electrostatic discharge or power supply interruption, allowing the pilot to regain full control within milliseconds through a stored stabilization calibration.
• Support for any number of regenerative servos
• Forward programming for easy adjustment of failsafe settings, servo frame rate settings, AS3X settings and more
• USB-C port for easy product registration and firmware updates
• 12V-capable for use with 12V servos (must be activated via Forward Programming)
• Integrated battery capacity monitor automatically reports battery capacity used during flight and can be automatically reset when fully charged batteries are installed
• Integrated black box telemetry log automatically stores all telemetry data when a micro SD card is installed (micro SD card not included)
• Integrated status LED provides helpful information at power-up, including warnings and mode indicators
• SRXL2 connectivity for easy one-wire connection to supported devices
• Ready to process Spektrum Smart ESC one-wire telemetry data without the need for additional modules, connections and cables
• Receiver energy and voltage sensor and flight log telemetry data without the need for additional sensors
• Telemetry data on battery temperature, cell balance, charge cycles and cell voltage is available when using smart batteries
• When using an SPM4651T satellite receiver, comprehensive telemetry with integrated barometer is available, enabling altitude and vario telemetry without additional modules
• The supplied momentary switch allows the system to be booted or shut down. System shutdown requires a press-and-hold input to prevent accidental shutdown if the switch fails or is disconnected. The switch itself must not be replaced. Additionally, there is a switch on the receiver itself that can be used instead
• Mounting lugs with rubber pads ensure a clean installation in the model and a small installation dimension
• Suitable for low frame rates of 11ms. This can be lowered to 5.5ms if the servos support this to further improve stabilization when using the Synapse module
• Binding is easier than ever, with four options to start the binding process
• Integrated telemetry ports for RPM, drive battery voltage, temperature sensor and X-Bus to expand telemetry sensors
• Compatible with all Spektrum DSMX transmitters
• Not compatible with the DSM2 AIRMOD JR module (SPMMSJR720)

Features of the Spektrum™ Synapse™ flight stabilization module

• All-new AS3X stabilization algorithm delivers the ultimate in flight performance and feel
• 20 stabilized outputs with increased sensor accuracy and data rate
• Thrust vector and canard support with Spektrum's new multi-gyro system (up to four independent gyro systems in one device)
• Intuitive forward programming makes the Synapse module the easiest system to set up without the need for an external device
• Machined, anodized aluminum housing with three mounting lugs
• The gyro sensor is surrounded by sound and vibration-reducing insulation developed for turbine applications
• New parameters and new menus in Forward Programming
• The new, internally mounted, locking cable connector system prevents disconnection during flight

Overview

The Spektrum™ AR20410T PowerSafe™ receiver is a feature-rich 20-channel receiver with full-range telemetry. Spektrum PowerSafe receivers are designed for models that use numerous servos and special functions that require high receiver currents, such as in large-scale models and turbine jets. Now the 20-channel PowerSafe receiver is also equipped with innovative features such as fast reboot, regenerative servo support, remote sleep mode and the all-new Synapse AS3X module.

The revolutionary Spektrum™ Synapse™ flight stabilization module has been significantly improved over its predecessor, the AS3000. Equipped with the all-new AS3X stabilization algorithm, the Synapse system has been thoroughly tested and put to the ultimate test by professional pilots. Spektrum has taken years of customer feedback on the AS3000 into account and developed the Synapse module specifically for turbine jets and large models. Its lightweight design and innovative features make it the ideal choice for pilots who want the best flight stabilization in today's world of complex models.

In the past, pilots had to reduce the performance of stabilization systems by lowering the damping rate to fine-tune it to their personal preference. Now, with our new Stop Lock and Release Rate parameters, they can customize the feel of the gyro system while achieving optimal stabilization performance.

With the Synapse module, we are introducing the ability to customize AS3X and SAFE settings for 10 customizable channels on all control functions. This allows pilots to precisely tune their aircraft in flight. In addition, it is also possible to stabilize auxiliary functions on receiver outputs that are linked to other control functions via mixers and not directly linked to the wing configuration. For example, flaps, which are taken along by the ailerons by activating a mixer, can now also be included in the stabilization.

We have combined the ability to use multiple gyro systems in a single device. This provides the same functionality as operating multiple gyro systems in one model, allowing you to stabilize special functions such as thrust vector control and canards without having to use an additional gyro. Changes have been made to the gyro filtering to improve response time, which significantly increases the effectiveness of the damping and greatly improves the stability of the aircraft in gusty conditions.

Finally, significant improvements have been made to the operation of the heading hold function. Now the transitions between control commands and post-correction of the flight attitude are more seamless, providing a more natural flight feel. In the Synapse module, we have isolated the sensor to suppress acoustic interference that can occur in some turbine applications. All of this is packaged in a beautiful aluminum housing with three vibration-dampened mounting points.

Combined with the new Spektrum™ AR20410T PowerSafe™ receiver, it's an incredible combination of advanced flight stabilization and state-of-the-art electronics.

Technical specifications

• Modulation: DSMX
• Bind Method: Bind Button, Bind Plug
• Product Width: 2.72" (69 mm)
• Technology : AS3X , SAFE
• Dimensions: Synapse Lead Length: 9" (229 mm)
• Remote Receiver Ports: 4
• SD Card/Airware Capable: Yes
• Battery: Sold Separately
• Product Length: 2.4" (61 mm)
• Band: 2.4GHz
• Application: Airplane
• Product Height: 0.75" (19 mm)
• Resolution: 2048 (4096 for Stabilization)
• Channels: 20
• Telemetry: Yes
• Input Voltage: 4V?12.6V
• Failsafe: Yes
• Connector Wire Length: (2) IC3 Input Connectors with Smart Technology
• Product Weight: 2.82 oz (80g)
• Integrated Variometer: Yes


Scope of Delivery
• (1) AR20410T 20-channel PowerSafe receiver
• (1) Synapse AS3X / SAFE flight stabilization module
• (1) SPM4651T SRXL2 serial telemetry satellite receiver
• (3) SPM9747 SRXL2 DSMS satellite receiver
• (1) 6" SRXL2 Satellite Receiver Cable
• (1) 12ldblquote SRXL2 Satellite Receiver Cable
• (1) 24ldblquote SRXL2 Satellite Receiver Cable
• (1) 36ldblquote SRXL2 satellite receiver cable
• (2) Battery IC3 connectors
• (2) Charging connectors
• (1) Telemetry voltage sensor
• (1) Soft switch
• (1) Operating instructions
• (3) Mounting screws