AGF-RC A50BHLW Servo

The AGF-RC A50BHLW is a low-profile brushless servo with an all-aluminum housing. The servo is HV capable and can be operated directly from a 2s LiPo (4.8 - 8.4V) and is waterproof to IP67. Instead of a potentiometer, a wear-free magnetic encoder is installed.

With an actuating force of 19kg, this power proftz can show what it can do in various tasks.
Whether in wing models, rc cars or on the swashplate in 580 to 700 helicopters - the A50BHLW delivers top performance at a good price.

The A50BHLW is also programmable with the optional AGF-SP USB interface.

This requires a Windows computer with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

Technical data:

Actuating force S1 (kg*cm): 16
Actuating force S2 (kg*cm): 19
Width (mm): 20.2
Height (mm): 26.5
Voltage range: 4.8V-8.4V
Length (mm): 40.8
Weight (g): 55
Control frequency: Up to 333Hz
Packaging: Blister large
High-voltage capable up to 8.4V: Yes
Recommended applications: Helicopter, airplane, car, boat
Classification: Low Profile
Ball bearing (quantity): 2
Voltage 1 (Volt): 6,0
Output teeth (number): 25
Motor type: Brushless motor
Housing type: Full metal
Voltage 2 (Volt): 8,4
Gearbox type: Titanium