AGF-RC B53DHN Servo

The AGF-RC B53DHN is a 20mm standard servo with a part-aluminum housing. The servo is HV capable and can be operated directly from a 2s LiPo (4.8 - 8.4V).
With 20kg of actuating force, this power proftz can show what it can do in various tasks. The maximum servo travel is up to 180°

The B53DHN delivers top performance at a very good price, whether in a fixed-wing model or an RC car.

15kg at 6.0V 0.21sec / 60°
18kg at 7.4V 0.185sec / 60°
20kg at 8.4V 0.17sec / 60°

The B53DHN is also programmable with the optional USB Inteface AGF-SP.

This requires a Windows computer with Windows 7 or 10. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.

Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!

Technical data:

Actuating time S2/60° (sec): 0.17
Actuating time S1/60° (sec): 0.21
Actuating force S1 (kg*cm): 15
Width (mm): 20
Actuating force S2 (kg*cm): 20
Voltage range: 4.8V-8.4V
Length (mm): 40
Height (mm): 42.3
Weight (g): 63
Control frequency: Control frequency up to 333Hz, center pulse 1520us
High-voltage capable up to 8.4V: Yes
Motor type: Brush motor
Recommended applications: Helicopter, airplane, car, boat
Ball bearing (number): 2
Voltage 1 (Volt): 6.0
Housing type: Part metal
Output teeth (number): 25
Voltage 2 (Volt): 8.4
Gear type: Titanium
Classification: Standard