- Novelties
- Back in stock
- Sell-Out
- Special Deals
Building Blocks- RC Helicopter
- RC Multicopter
- RC Planes
- RC Cars
- RC Boats
- RC Motorcycles
- RC Functional Models
- RC Simulators
- BEASTX
- Engine Electric
- Engine Nitro
- Batteries
- Electronics
- FPV / Cameras
- Measuring Tools
- Tools
- Accessories
- Outdoor
- Merchandising
- Reference books
- Gift Voucher
- Identification-Plates
- Sonderposten
AGF-RC A62BHL SERVO
Picture can be different from original item
The AGF-RC A62BHL is a low-profile brushless servo with an all-aluminum housing. The servo is HV capable and can be operated directly from a 2s LiPo (4.8 - 8.4V).
With an actuating force of 20kg and a weight of only 57.2 grams, this powerhouse can show what it can do in various tasks. At just 0.070sec/60°, the A62BHL is extremely fast, making it the ideal servo for the ambitious racer or pilot. The maximum servo travel is up to 180°
Whether in wing models, rc-cars or on the swashplate in 580 to 700cc helicopters - the A62BHL delivers top performance at a good price.
17kg at 6.0V 0.090sec / 60°
19.5kg at 7.4V 0.080sec / 60°
20kg at 8.4V 0.070sec / 60°
The A62BHL is also programmable with the optional USB Inteface AGF-SP.
An aluminum lever (HSS20P2) is already included in the scope of delivery, see pictures.
A Windows computer with Windows 7 or 10 is required for this. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.
Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!
Actuating time S2/60° (sec): 0.070
Actuating time S1/60° (sec): 0.090
Actuating force S1 (kg*cm): 17
Actuating force S2 (kg*cm): 20
Width (mm): 20.2
Height (mm): 26.5
Voltage range: 4.8V-8.4V
Length (mm): 40.8
Weight (g): 57.2
Control frequency: Control frequency up to 333Hz, center pulse 1520us
High-voltage capable up to 8.4V: Yes
Recommended applications: Helicopter, airplane, car, boat
Classification: Low profile
Ball bearing (number): 2
Voltage 1 (Volt): 6.0
Output teeth (number): 25
Motor type: Brushless motor
Gear type: Steel
Housing type: Full metal
Voltage 2 (Volt): 8.4
With an actuating force of 20kg and a weight of only 57.2 grams, this powerhouse can show what it can do in various tasks. At just 0.070sec/60°, the A62BHL is extremely fast, making it the ideal servo for the ambitious racer or pilot. The maximum servo travel is up to 180°
Whether in wing models, rc-cars or on the swashplate in 580 to 700cc helicopters - the A62BHL delivers top performance at a good price.
17kg at 6.0V 0.090sec / 60°
19.5kg at 7.4V 0.080sec / 60°
20kg at 8.4V 0.070sec / 60°
The A62BHL is also programmable with the optional USB Inteface AGF-SP.
An aluminum lever (HSS20P2) is already included in the scope of delivery, see pictures.
A Windows computer with Windows 7 or 10 is required for this. The servos are supplied directly via the USB port and only need to be plugged into the interface. In the software, for example, the soft start, the neutral point, the servo travels can be adjusted (larger and smaller) or the direction of rotation can be set. Furthermore, the Sanwa SSR mode can be activated if required, which is of particular interest to RC car drivers. The integrated overload cut-off can also be adjusted in 3 stages and you can select what should happen in the event of signal loss.
Of course, these are optional features, all servos can be operated as normal straight out of the box and do not need to be adjusted beforehand!
Features
Actuating time S2/60° (sec): 0.070
Actuating time S1/60° (sec): 0.090
Actuating force S1 (kg*cm): 17
Actuating force S2 (kg*cm): 20
Width (mm): 20.2
Height (mm): 26.5
Voltage range: 4.8V-8.4V
Length (mm): 40.8
Weight (g): 57.2
Control frequency: Control frequency up to 333Hz, center pulse 1520us
High-voltage capable up to 8.4V: Yes
Recommended applications: Helicopter, airplane, car, boat
Classification: Low profile
Ball bearing (number): 2
Voltage 1 (Volt): 6.0
Output teeth (number): 25
Motor type: Brushless motor
Gear type: Steel
Housing type: Full metal
Voltage 2 (Volt): 8.4
Restocking
| Item number | AGF-A62BHL |
| Manufacturer | AGF-RC |
| Packing weight | 0,0 Kg |
Tell a friend