CR-18pro 1:18 Pro Crawler Trail Hunter sand RTR
Absima's 1:18 crawler in the PRO version can do more than many of its big brothers. Especially with the "Performance Upgrade" like portal axles front and rear, metal gearbox made of tool steel, 1.2" tyres and a modified drive ratio for even more torque, it becomes a real crawler fun machine.
You don't need much space and the "Playground" is quickly built. Just throw a few cushions or on the ground and the fun can begin! The proportional radio remote control makes the finest driving manoeuvres possible and steers the little crawler over even the most complicated-looking obstacles.
• Portal axles front & rear
• Metal gearboxes on front & rear axles.
• 2.4GHz transmitter/receiver unit
• Lighting by operation on transmitter
• Oversize 1.2" AT tyres with internal bead lock system
• Chassis mounted 1kg steering servo with panhard bar
• PPX4 water resistant electronics
• Metal chassis frame
• Painted 1.2mm Lexan bodywork
• Tight turning circle of 80cm
• Drive time of up to 45 minutes
• Steering angle of up to 45°.
• Ultimate ground clearance due to portal axles and 1.2" tyres
Due to its design, the "Trail Hunter" chassis probably has the highest ground clearance currently available on the market.
• Scale: 1:18
• 4WD (four-wheel drive)
• 2.4GHz remote control system
• High torque gearbox, reduction ratio 104:1
• 55T / 030 brushed motor
• Differentials fully locked (front & rear)
• Telescopic UJ cardan shafts
• Metal chassis frame
• Drag/Mountain Brake (prevents rolling on hills)
• Digital proportional steering for sensitive driving manoeuvres
• LED lighting
• Scale body with many add-on parts
• Bead lock rims with super soft AT tyres
• Waterproof 1kg mini steering servo
• 2-in-1 speed controller/receiver unit
• Drive time: approx. 45 minutes
Extreme approach and departure angle (67.4° / 80.5°)
Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
Remote control: 2.4GHz, 4-channel
Steering servo: 1kg actuating force, waterproof
Motor: 030 / 55T
Gear ratio: 104:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector system: Molex 2-pin
Wheelbase: 158,5mm
Ground clearance: 43,7mm
Track width: 110mm
Length: 241mm
Width: 125mm
Height: 130,8mm
Weight: 400g
Wheels: 19.5x58mm
• 1x Mini PRO Crawler
• 1x 2.4GHz transmitter unit
• 1x LiPo battery 7.4V 600mAh
• 1x US charging cable
• 1x sticker sheet
• 1x manual DE/EN/FR
• 1x Mini tool set
• 4x AAA batteries for the transmitter
You don't need much space and the "Playground" is quickly built. Just throw a few cushions or on the ground and the fun can begin! The proportional radio remote control makes the finest driving manoeuvres possible and steers the little crawler over even the most complicated-looking obstacles.
HIGHLIGHTS:
• Portal axles front & rear
• Metal gearboxes on front & rear axles.
• 2.4GHz transmitter/receiver unit
• Lighting by operation on transmitter
• Oversize 1.2" AT tyres with internal bead lock system
• Chassis mounted 1kg steering servo with panhard bar
• PPX4 water resistant electronics
• Metal chassis frame
• Painted 1.2mm Lexan bodywork
• Tight turning circle of 80cm
• Drive time of up to 45 minutes
• Steering angle of up to 45°.
• Ultimate ground clearance due to portal axles and 1.2" tyres
Due to its design, the "Trail Hunter" chassis probably has the highest ground clearance currently available on the market.
FEATURES:
• Scale: 1:18
• 4WD (four-wheel drive)
• 2.4GHz remote control system
• High torque gearbox, reduction ratio 104:1
• 55T / 030 brushed motor
• Differentials fully locked (front & rear)
• Telescopic UJ cardan shafts
• Metal chassis frame
• Drag/Mountain Brake (prevents rolling on hills)
• Digital proportional steering for sensitive driving manoeuvres
• LED lighting
• Scale body with many add-on parts
• Bead lock rims with super soft AT tyres
• Waterproof 1kg mini steering servo
• 2-in-1 speed controller/receiver unit
• Drive time: approx. 45 minutes
TECHNICAL DATA
.Extreme approach and departure angle (67.4° / 80.5°)
Speed controller: 2-in-1 ESC/RX unit, PPX4, 10A/50A
Remote control: 2.4GHz, 4-channel
Steering servo: 1kg actuating force, waterproof
Motor: 030 / 55T
Gear ratio: 104:1
Battery: LiPo 7.4V/2S 600mAh
Battery connector system: Molex 2-pin
Wheelbase: 158,5mm
Ground clearance: 43,7mm
Track width: 110mm
Length: 241mm
Width: 125mm
Height: 130,8mm
Weight: 400g
Wheels: 19.5x58mm
SUPPLY:
• 1x Mini PRO Crawler
• 1x 2.4GHz transmitter unit
• 1x LiPo battery 7.4V 600mAh
• 1x US charging cable
• 1x sticker sheet
• 1x manual DE/EN/FR
• 1x Mini tool set
REQUIRED ACCESSORIES:
• 4x AAA batteries for the transmitter
Restocking
Item number | AB-18031 |
Manufacturer | Absima |
Packing weight | 0,0 Kg |